Two New GPU Melting Reports Show 8-Pin PCIe Power Connectors Are Not Completely Risk-Free
Two new reports from PC users have drawn attention to a rare but important issue: melted 8-pin PCIe power connectors on graphics cards. While most recent connector-melting discussions have focused on newer 12-pin and 16-pin GPU power designs, these incidents show that even the long-established 8-pin PCIe connector can fail under the wrong conditions.
The 6-pin and 8-pin PCIe power connectors have long been considered reliable choices for powering graphics cards. They are widely used, simple to connect, and generally durable when installed correctly. However, no power connector is completely immune to heat damage, especially if the cable is loose, poorly seated, aging, or connected to a questionable power supply.
One of the latest cases involved a GeForce RTX 5060 Ti 16 GB. The owner reported that the system suddenly stopped displaying an image on the monitor. After troubleshooting and removing the graphics card, the user discovered that the 8-pin PCIe power connector had burned badly. The damage appeared on both the GPU-side connector and the cable plug.
The card was reportedly powered by a single 8-pin PCIe cable connected to a 750W Ant eSports power supply. While the power supply brand is not among the most popular choices with enthusiast PC builders, some observers noticed another possible issue: the connector may not have been fully inserted into the graphics card. A loose or partially connected PCIe power cable can create higher resistance, leading to heat buildup and, in severe cases, melting.
A second case involved a Radeon RX 9060 XT. This user reported using a higher-end Corsair power supply, yet still experienced melting on the 8-pin PCIe cable. In this case, most of the visible damage appeared on the cable connector, though the GPU’s power socket also showed signs of heat-related damage.
The owner noted that the cable was around four years old. Age alone does not automatically make a PCIe power cable unsafe, but repeated bending, plugging, unplugging, dust buildup, or wear can reduce reliability over time. Once again, an improper or incomplete connection may have played a role.
What makes both cases notable is that these are not extremely power-hungry graphics cards. GPUs in this performance class typically draw far less power than flagship models, often sitting around the 160W to 180W range depending on the card and workload. That makes widespread melting highly unlikely, but it also proves that even lower-power graphics cards can be affected if the connection is not secure.
For PC builders and gamers, the main lesson is simple: always make sure your GPU power connector is fully inserted. The plug should sit firmly in the socket, with no visible gap between the connector and the graphics card. If the connector feels loose, does not click into place, or appears difficult to seat properly, the system should not be powered on until the issue is resolved.
It is also a good idea to inspect PCIe power cables periodically, especially when upgrading a graphics card or reusing older cables. Look for discoloration, a burnt smell, warped plastic, loose pins, or any sign of heat damage. If any of these are present, stop using the cable immediately.
Users should also avoid mixing modular power supply cables from different PSU brands or models unless the manufacturer specifically confirms compatibility. Modular cables can have different pin layouts even if they look identical from the outside, and using the wrong cable can damage components.
Although these two melted 8-pin PCIe connector cases may sound alarming, they remain rare. The traditional 8-pin PCIe connector is still considered dependable when used correctly. Most users will never encounter this problem, especially with a quality power supply, properly seated connectors, and cables in good condition.
Still, these incidents are a reminder that GPU power delivery should not be ignored. Whether you are using a mainstream graphics card like an RTX 5060 Ti or a Radeon RX 9060 XT, a secure power connection is essential. A few seconds spent checking the cable can prevent expensive damage to your graphics card, power supply, or entire gaming PC.






